The
M-6 threaded connector allows for the easy, secure connection of the flow
cell into the pump/manifold plumbing of your system. The threading is standard
metric M6 type which forms a tight seal when threaded into the top of the
flow cell. The M6 connector holds a PTFE tube firmly in place which seals
tightly against the internal quartz surface of the flow cell. Using this
design, your sample comes in contact with PTFE and quartz only. The connection
is further stabilized by the use of a stainless steel ring and neoprene
o-ring assembly which keeps the PTFE tubing from deforming when tightened.
Each connector is supplied with 40 cm of PTFE tubing. The dimensions of
the supplied tubing is: 1.6mm OD, 0.8mm ID
| Component |
Area |
Dimension |
| M6
Connector |
Total
height, tall side |
26
mm |
| M6
Connector |
Total
height, short side |
19
mm |
| M6
Connector |
Diameter |
6
mm |
| PTFE
tubing |
Outside
diameter (OD) |
1.6
mm |
| PTFE
tubing |
Inside
diameter (ID) |
0.8
mm |
| PTFE
tubing |
total
length |
400
mm |
|
 |
